Sink Stainless Steel Pop Up Basin Waste With Overflow

How to install pop up basin waste With Overflow

Step-by-step installation:

1. Preparation:

   • Turn off the water supply to the sink before starting the installation.
   • Place a towel or cloth underneath the sink to catch any water that may spill during the process.
   • If there is an existing drain assembly, remove it by unscrewing the nut holding the old drain in place. Use pliers if necessary.

2. Assemble the pop-up waste:

   • Take the pop-up basin waste with overflow kit and assemble the stopper and rod according to the manufacturer's instructions. Make sure the rod is at the correct length to operate the pop-up mechanism from the faucet or the lever at the back of the faucet.

3. With these steps completed successfully, your pop-up basin waste with overflow should now be installed and ready to use. As always, if you encounter any difficulties or issues during the installation process, consider seeking help from a professional plumber.

4. Apply plumber's putty or silicone sealant:

   • Apply plumber's putty or silicone sealant around the underside of the flange of the pop-up waste.
   • Insert the pop-up waste into the sink's drain opening from above, ensuring that the stopper faces the correct direction.

5. Install the rubber gasket and nut for the overflow:

   • Underneath the sink, locate the overflow opening, which is usually near the top of the sink's bowl.
   • Insert the rubber gasket into the overflow opening.
   • Thread the nut provided with the pop-up waste through the threaded rod of the pop-up waste and tighten it onto the rubber gasket. This secures the pop-up waste and ensures a watertight seal for the overflow.

6. Secure the waste assembly:

   • With the overflow secured, screw the nut onto the threaded tailpiece of the pop-up waste to secure it in place. Use an adjustable wrench or a basin wrench to tighten the nut snugly. Be careful not to overtighten, as it may damage the sink or cause leaks.

7. Connect the lift rod or lever:

   • If your faucet has a lift rod at the back, attach the rod to the pop-up waste's horizontal arm.
   • If your faucet has a lever, connect the lever to the pop-up waste's horizontal arm.
   • Adjust the length of the rod or lever as needed, so it operates smoothly.

8. Check for leaks and proper operation:

   • Turn on the water supply to the sink and test the pop-up waste by operating the faucet. Check if the stopper lifts and seals the drain properly.
   • Fill the sink with water to test the overflow. Ensure that the water level reaches the overflow opening, and observe if it drains correctly without overflowing the sink.

9. Clean up:

   • Wipe away any excess plumber's putty or silicone sealant from around the drain flange.

Package Detail

OEM Logo Polybag, Colour Boxs, Colour Master Carton

• FAQ

Q: How long is your product guarantee period?
A: We have Two years guarantee and 24 hours full-time service.

Q: What is your MOQ?
A: Normal Each Items 3000pcs MOQ.

Q: Can you accept OEM,ODM?
A: we accpet OEM.

Q: How long is your delivery time?
A: 30-35 days After Confirm Order